Nose weight, also called tow ball weight, is the downward force of the trailer's coupling on the tow ball. Too little and the trailer sways and can snake at speed; too much and the tow vehicle's front wheels lose grip. Most towing guides aim for about 7% to 10% of the loaded trailer's mass, as long as it stays within the tow bar's rating.
How to measure nose weight at home
- Park the trailer on level ground, loaded as you will tow it, with the jockey wheel up off the ground.
- Put a bathroom scale under the coupling with a short sturdy post or block on it, so the coupling sits at the height it would on the tow ball.
- Lower the coupling onto the post and read the scale. If the scale only reads up to about 150 kg, use a lever: a plank on a pivot halfway between the coupling and the scale halves the reading, so double it.
- Move weight forward or back and measure again until the figure sits in the range above.
Loading for a stable tow
Put the heaviest items low and over or just ahead of the trailer's axle, tie everything down so it cannot shift, and keep heavy things out of the very front and the very back. Water tanks, gas bottles and spare wheels on caravans move nose weight a lot, so measure with them as you will travel. Check the coupling and safety chain, the trailer plug and the lights before each trip; see trailer hitches and couplings and whether your vehicle may tow the trailer at all.
